PRODUCT DETAILS PAGE

Reclaimed Chestnut Flooring Remilled

Rare, beautiful and a bit pricey.

Our rare Antique Chestnut flooring is made from hand-selected barn wood. Planks ranges in color from light to medium honey and contain evidence of their age and their former life including blackened nail holes, insect marks, weathered cracks and some patina. An Aged Woods® Antique American Chestnut floor is uniquely beautiful with minimum character and minimum patina. Due to a blight, this species went extinct in the beginning of the 20th century.

This flooring is suitable for use in:

 

  • Residences
  • Commercial – light traffic

 

SOLID SPECS

  • 100% Recycled / Contributes to LEED® MRc3: Material Reuse
  • All planks are kiln-dried to 8%, +/-2% before being milled and graded to our consistently high standards by trimming out defects and waste.
  • Unfinished, prefinishing is optional
  • Standard plank thickness: 3/4″, other thicknesses available / Standard plank length: 2′ to 10′, LONGER, IF AVAILABLE, WILL BE INCLUDED
  • Beveling and/or end-matching: Optional
  • Single width planks: 3″ up to 10″ (depending on availability)
  • Typically sold in ranges of four consecutive widths: 3″ to 6″, 4″ to 7″ and 5″ to 8″ with other ranges available. (Random amounts of each width in the range are included in every order, e.g. 3″ to 6″ will contain 3″, 4″, 5″ and 6″ planks)

ENGINEERED SPECS

  • Contributes to LEED® MRc4: Recycled Content
  • Wear layers are kiln-dried to 8%, +/-2% and adherred to a no formaldehyde, 9-layer Baltic Birch substrate w/no VOC adhesive
  • Unfinished, prefinishing is optional
  • Standard plank thickness: 5/8″, with 3/4″ and 7/16″ available / Standard plank length: 2′ to 10′
  • Wear layer/substrate thicknesses (for 5/8″): 4mm/12mm / may vary with different thickness flooring
  • End-matching: STANDARD / Beveling: Optional, but recommended.
  • Single width planks: 3″ up to 10″ (depending on availability)
  • Typically sold in ranges of four consecutive widths: 3″ to 6″, 4″ to 7″ and 5″ to 8″ with other ranges available. (Random amounts of each width in the range are included in every order, e.g. 3″ to 6″ will contain 3″, 4″, 5″ and 6″ planks)

FINISHING OPTIONS

  • Available on orders of at least 500SF
  • Low-VOC and agro-based NO VOC options available
  • Beveling is STANDARD with prefinishing
  • CUSTOM COLOR MATCHING IS OUR SPECIALTY!
  • Contact us for pricing – varies with quantity, finish type and stain, if any.

INSTALLATION INFO

  • SOLID – nail down or gluedown (with exceptions) / ENGINEERED – naildown or gluedown
  • Over radiant heat (with exceptions and precautions)
  • SOLID – On or above grade / ENGINEERED – on, above or below grade

Please contact us by phone to discuss your project or use the Contact Form to begin the discussion. We look forward to providing you with the highest level of service!