Reclaimed Wood Treads, Risers, etc.

background image
custom reclaimed oak staircase with a large starter step.
background image

Treads, Risers, etc. Remilled From Salvaged Barn Wood

If you have a staircase on your project, consider building/re-building it with authentic antique wood treads, risers, nosings, etc., that compliment our floors. Like our Aged Woods® flooring, our stair parts are 100% reclaimed.

Please call to discuss your project/our products, or use the Contact Form to begin the discussion. We look forward to providing you with the highest level of service!

  • Stair parts to match our Antique or Antique Distressed® flooring are available and are sold only in conjunction with a flooring order. Antique Distressed® stair parts are graded for stability while matching as close as possible the corresponding flooring. FSC Recycled 100% / Contributes to LEED® MRc3: Material Reuse
  • All wood is kiln-dried to 8%, +/-2% before being glued up and/or milled. Only the soundest material is used for Aged Woods® stair parts.
  • Unfinished – needs finishing with the finish of your choice after installation
  • Standard treads are 5/4 glued-up 11-1/4˝ deep, planed to 1-1/16˝ and nosed. Length as ordered.
  • Standard risers are 3/4˝ x 8˝. Length as ordered.
  • Standard nosing is 5/4 x 3-1/2˝ solid stock, planed to 1-1/16˝ rabetted to 3/4˝ with a 1˝ deep nosed overhang. Length as ordered.
  • Returns are referred to as being “LEFT” and “RIGHT” when standing at the bottom facing the staircase.
  • U.S. Dollars Per LINEAL foot: TREADS range from about $30 to about $40, and risers and nosings range from about $15 to about $20, not including shipping. Lengths over 6′ and 10′ are 10% and 20% additional respectively.
  • Returns are about $27 for ONE end and about $38 for BOTH ends.
  • Stair parts are sold only in conjunction with flooring.